The separatus system: borehole heat exchanger (BHE), distributor, accessories
separatus develops and manufactures the patented Splitpipe borehole heat exchanger (Splitpipe BHE) (a two-chamber pipe with 51 mm external diameter) including distribution systems, probe heads and built-in accessories. It is delivered to drilling contractor, planners and installers in Switzerland, Germany and Austria.
borehole heat exchanger (BHE) SplitpipeZ
Technical data, comparison to double U-tube BHE, operational limits. The full product page.
To the Splitpipe probe CatalogueProduct catalogue with list prices
All articles with article number, specification and list price, from probe tube to accessories.
Catalogue PlanningPlanning documents and fiches
Dimensioning, installation, connection with electrofusion coupler. The documents for offer and execution.
For documentsWhat the narrow bore costs and what it saves
Probe diameter
51 mm
Pre- and return in a two-chamber pipe
Drilling diameter
108 mm
instead of 132 mm conventionally. Comparative assumption for the costs mentioned.
Drilling and total costs of the Earth probe plant
−15 %
each approximately 15 % lower, for 108 mm instead of 132 mm borehole
Annual working number
4,6
instead of 3,1 an air-to-water heat pump. 48 % higher; Field measurements University of applied sciences OST.
One tube instead of four
Little space for drilling, close access, garden and trees should remain: this is where the Splitpipe comes in. The two-chamber tube with 51 mm external diameter carries preliminary and return separately in a single probe, instead of four pipe strands of a double U-tube BHE. The borehole shrinks to 108 mm, a compact drilling rig is sufficient, and drilling and overall costs of the Earth probe plant decrease by around 15 %.
The Splitpipe probe in detailAre you planning a project or do you have questions?
Calculate first: The cost comparison calculator works with your own numbers. Or write to us directly. The team in Widnau usually responds on the same working day.
Benjamin Pernter is based in Neusiedl and is the contact person for Austria and beyond. benjamin.pernter@algeo.ch